





Progrip Waterborne Epoxy Floor Primer
Floor & Driveway Primer
Ideal For
Driveways & Walkways
Pool Decks
Garage Floors
RECOMMENDED SURFACES
Description
Progrip Waterborne Epoxy Floor Primer
Progrip is an epoxy-ester bonding primer that prepares difficult floor and driveway surfaces for top coating. Unlike standard acrylic primers that form a film on the surface, Progrip penetrates into bare concrete, previously coated substrates, masonry, metal and wood, stabilizing chalky or weathered conditions and anchoring the finish coat.
Use Progrip as a tie-coat on previously painted floors, on bare concrete more than 30 days old, and on smooth or non-porous surfaces where adhesion is a concern. Apply by brush, medium-nap roller or pump-up sprayer; do not overapply, and back-roll any puddles. Dry to the touch in 2 hours at 77°F and 50% humidity, with an optimal recoat window of 8 to 12 hours.
Available in 1-gallon and 4.6 gallon sizes. Pairing Progrip with Protread Floor Paint creates a complete system for maximum adhesion and durability on driveways, garage floors, pool decks and walkways.
Preparation
Step 1Pressure Clean:
Surfaces must be clean, dry, sound, and free of dirt, dust, grease, oil, wax, soap film, rust, mold, mildew, curing compounds, and other contaminants. For best results, pressure wash at 2500 PSI or greater. For previously painted surfaces, remove all loose, peeling, or chipped paint. Progrip Primer may be applied over firmly bonded coatings after thoroughly cleaning the surface.
Step 2Application:
Progrip Primer can be applied by brush, medium-nap roller, or pump-up sprayer. Do not overapply. Back-roll any puddles or areas of excess material to ensure an even application. Do not reuse application containers for future painting, as residual primer may react with or contaminate other coatings.
Most applications are dry to touch in two (2) hours @ 77 degrees Fahrenheit and 50% relative humidity. The optimal recoat window is 8–12 hours after application. Lower temperatures, higher humidity, excessive film thickness, and poor ventilation may extend dry and recoat times.
Progrip Waterborne Epoxy Floor Primer
Progrip is an epoxy-ester bonding primer that prepares difficult floor and driveway surfaces for top coating. Unlike standard acrylic primers that form a film on the surface, Progrip penetrates into bare concrete, previously coated substrates, masonry, metal and wood, stabilizing chalky or weathered conditions and anchoring the finish coat.
Use Progrip as a tie-coat on previously painted floors, on bare concrete more than 30 days old, and on smooth or non-porous surfaces where adhesion is a concern. Apply by brush, medium-nap roller or pump-up sprayer; do not overapply, and back-roll any puddles. Dry to the touch in 2 hours at 77°F and 50% humidity, with an optimal recoat window of 8 to 12 hours.
Available in 1-gallon and 4.6 gallon sizes. Pairing Progrip with Protread Floor Paint creates a complete system for maximum adhesion and durability on driveways, garage floors, pool decks and walkways.
Step 1Pressure Clean:
Surfaces must be clean, dry, sound, and free of dirt, dust, grease, oil, wax, soap film, rust, mold, mildew, curing compounds, and other contaminants. For best results, pressure wash at 2500 PSI or greater. For previously painted surfaces, remove all loose, peeling, or chipped paint. Progrip Primer may be applied over firmly bonded coatings after thoroughly cleaning the surface.
Step 2Application:
Progrip Primer can be applied by brush, medium-nap roller, or pump-up sprayer. Do not overapply. Back-roll any puddles or areas of excess material to ensure an even application. Do not reuse application containers for future painting, as residual primer may react with or contaminate other coatings.
Most applications are dry to touch in two (2) hours @ 77 degrees Fahrenheit and 50% relative humidity. The optimal recoat window is 8–12 hours after application. Lower temperatures, higher humidity, excessive film thickness, and poor ventilation may extend dry and recoat times.

Dynamic Uses
Previously coated surfaces, Bare Concrete (+30 Days), Porous + Non-Porous Surfaces
Professional Grade
Specifically Formulated as a primer to be top coated with high performance floor coatings
Epoxy-Ester Formula
Utilizes a unique epoxy-ester formulation where normal primers are waterborne acrylic.






